Patlite KJT Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Audio Patlite KJT. PATLITE KJT User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
٨
Use only specified operating voltage range. Excess voltage hastens degradation.
٨
Make sure to set fuse in a power supply side, please connect a fuse.
٨To clean lens, head cover, and body, wipe with water or glass
cleaner
soaked soft cloth. Do not use thinner or benzine, gasoline,
oil as these cause
color change or deform the surface.
٨
Absolutely do not connect direct power in a signal wire and common
wire,
damage the internal circuit.
٨
Make sure not to use any other bulbs except ones described in specifications.
Caution
4048-L
C95100022
FC001
INSTRUCTION MANUAL
TYPE KJT , KJPV
,
Thank you for purchasing a , . To ensure
proper operation, please read this instruction manual thoroughly
before attempting to use the system. Also, when undertaking
maintenance, inspection or repair work, be sure to refer to this
manual. If you have any questions regarding this product, please feel
free to contact us.
٨Wiring should be careful enough there to be for no mistake. If wiring is
mistaken, an internal circuit will be damaged and it will become the cause
of a fire.
٨When the installation of this product requires the construction, please ask
to specialist. Electric shock, fire and fall may occur.
٨
When you use this product for security purpose, routine inspection
must be
done. Just in case of emergency we recommend you to use this product
together with other security product.
٨Do not use this product without lens or head cover with cracked lens. It
may cause electric shock.
٨
Make sure power is turned off to avoid electric shock, when you
repair this
product as color reformation.
٨Make sure power is turned off and the temperature of electric bulb falls
down for repair to avoid electric shock and burn.
٨
Make sure power is turned off when checking or changing a fuse
to prevent
danger of electric shock
٨Turn off the power supply before making wiring connections. Neglecting to
so may cause an electric shock.
٨All loose ends of wires left unconnected upon the completion of
wiring
must be insulated individually, or they may cause equipment
problems, short
circuits or electric shock.
٨When mounting the unit outdoors or in a place where water may
splash on
it, avoid inverted or sideways mount. If water seeps into
the unit through the
drain hole on the bottom of the case, then collects inside, it may cause an
electric shock or short circuit.
٨
Be careful when handle a bulb, reflector or lens (or other plastic parts) since
these parts are fragile.
٨
Be sure to waterproof an uncoated part of power supply line and signal line in
case this product is used in the rain or water exposing
environment. Water
immersion into the product may result in malfunction
or electric shock.
Warning
4048-L
'09.4.AUTO
Turn to left.
(Remove)
Push down
Turn to right.
(Install it.)
Make sure power is turned off
when changing lens.
Loosen head cover screw, then
put the lens off.
Put the new lens, then installing
head cover.
Ԙ
ԙ
Ԛ
1. Change lens
2. Change bulb
3. How to adjust the sound volume
Be sure to reinstate the rubber packing
to the body lens and head cover
(one size for all applications) or the
unit will no longer be splash proof.
Slide to upward
for removal.
Slide to downward
for installation.
Remove screw
Please follow the procedure mentioned below to change the lens
㧚MAINTENANCE
Please follow the procedure mentioned below to change the bulb.
Please follow the procedure mentioned below to adjust the volume.
̪
Make sure power is turned off when
changing lens.
Remove lens. ( Refer to the "Change lens " )
The bulb can be easily removed by
pressing it downward to turn to left.
The new bulb can be easily installed
by pressing it downward to
turn to right.
Install lens. ( Refer to the " Change lens " )
Ԙ
ԙ
Ԛ
ԛ
Ԝ
Remove lens. ( Refer to the "Change lens " )
It is adjustable when volume turned.
Install lens. ( Refer to the " Change lens " )
Ԙ
ԙ
Ԛ
VOL.
To increaseTo decrease
٨
٨
٨
٨
٨
٨
Make sure power is turned off for electric shock prevention in case
of bulb repair.
Make sure power is turned off when checking or changing a fuse
or bulb to prevent danger of electric shock.
Make sure power is turned off and the temperature of electric bulb
falls down for repair to avoid electric shock and burn.
Make sure not to use any other bulbs except ones described in
specifications.
Do not use the hands to rotate reflector.
Do not oil the motor and roter. (Neither will it rotate if oil enters
the motor.)
Caution
㧣㧚BEFORE REQUESTING SERVICE
㧤㧚SPECIFICATIONS
Please note that any malfunction or damage resulting from modification by
the warranty.
̪
Please check the list shown below before requesting repairs. If the
product still not work, please contact us for repairs. Please feel free
to contact our sales office with any questions concerning the product.
For inquiry, you are required to identify the number indicated at the
name plate of the product.
Problems Where to check What to do
Is the power on?
࡮+Uwiring mistake?
࡮+Uwiring mistake?
Is the method of the
message choice wrong?
࡮+Utype of sound
wrong?
Check the power wiring plug
connection and fuse.
If a switch is installed check to
see that It is turned on.
Bulb stays
turned off
The reflector
would not rotate
No sound from
speaker
No sound from
speaker
Is the light bulb
burned out?
If it is, replace it with a new one.
The reflector
rotates but the
lamp is off
The bulb is
turned on
but the reflector
stays stopped
The motor is broken or has
reached the end of its life.
Request a repair.
Adjust the volume of the equipment
for proper sound level.
Is the motor stopped?
Is the motor lubricated?
Is volume the
smallest?
Check and correct the power
polarity. (24V version only)
Wrong message
or sound
played back
غ116
1lightޓ232
2lightsޓ337
3lightsޓ442
17
1. Dimensions
(mm)
Signal line : approx.400
Power supply wire
: approx.300
(Type 24V DC:approx.250)
2. Type of sound
3. Specifications
4-M6
3ch(Pink)
5ch(Purple)
6ch(Gray)
7ch (White)
8ch (Blue)
Bell
(clear high pitched bell)
Synthesized
Piano
Synthesized Bell
Chime (door chime)
4ch(Light green)
Yelp
(rapid siren)
Call sign (PiPiPi̖
KJT-L
(
chimemelody
)
KJT-K
(alarm)
type
ch
A
㧿
1ch (Sky blue)
Beep
(slow intermittent horn)
Rapid Hi-Lo
Amaryllis
2ch(Yellow)
Stutter
(rapid intermittent horn)
Melody Chime
Cuckoo
Holdiridia
SymphonyNo.40
For Elise
Maiden's Prayer
Merry had a
little Lamb
The camptown
Races
Annie laurie
Minuet
Ob-La-Di,
Ob-La-Da
On the Avignon
bridge
Blacksmith in
the village
Romance
De Amour
London bridge is
falling down
Petrouchka
Silent Lakeside
Mountain
musician
MODEL
1-light
2-lights
Model
Rated voltage
Bulb
Max volume level
Vibration proof
Operative location
Dispatch frequency
Anti-noise (Power supply)
Operative voltage range
Operative temp. range
Power
consumption
KJT-102KA,Lغ
KJT-202KA,Lغ
KJT-302KA,Lغ
1.4kg
2.0kg
2.6kg
KJT-110KA,Lغ
KJT-210KA,Lغ
KJT-310KA,Lغ
KJT-112KA,Lغ
KJT-212KA,Lغ
KJT-312KA,Lغ
KJT-120KA,Lغ
KJT-220KA,Lغ
KJT-320KA,Lغ
KJT-124KA,Lغ
KJT-224KA,Lغ
KJT-324KA,Lغ
24V AC/DC
45m/s
2
24V 10W
100V AC 120V AC 220V AC 240V AC
25W(AC)/18W(DC)
20W
36W(AC)/28W(DC)
26W
47W(AC)/38W(DC)
32W
1.7kg
2.4kg
3.0kg
12V 5W
19.6m/s
2
2127V AC/DC
90110V AC
100140V AC
-20͠㨪+50͠(Humidity 85% or less)
90dB max.(at 1m)
indoor , outdoor (upright) IP23
500Vp-p
262.144kHzr20%
Grass:G18, Base:BA15S
180240V AC 220260V AC
3-lights
1-light
2-lights
Mass
3-lights
1-light
2-lights
3-lights
Type KJT
1-light
2-lights
Model
Rated voltage
Bulb
Max volume level
Voice synthesis method
Muximum-recording time
Vibration proof
Operative location
Anti-noise (Power supply)
Operative voltage range
Operative temp. range
Power
consumption
KJPV-102S
KJPV-202S
KJPV-302S
1.4kg
2.0kg
2.6kg
KJPV-110S
KJPV-210S
KJPV-310S
KJPV-112S
KJPV-212S
KJPV-312S
KJPV-120S
KJPV-220S
KJPV-320S
KJPV-124S
KJPV-224S
KJPV-324S
24V DC
45m/s
2
24V 10W
100V AC 120V AC 200V AC 240V AC
20W 20W
30W 26W
40W 31W
1.7kg
2.4kg
3.0kg
12V 5W
19.6m/s
2
2027V DC 90110V AC
100140V AC
-10͠㨪+55͠(Humidity 85% or less)
95dB max.(at 1m)
ADPCM
16sec. (1Mbit EPROM)
indoor , outdoor (upright) IP23
500Vp-p
Grass:G18, Base:BA15S
180240V AC 220260V AC
3-lights
1-light
2-lights
Mass
3-lights
1-light
2-lights
3-lights
Type KJPV
٨
We are not in a position to be responsible for damage and
trouble caused by handling against caution and warning
described in this instruction manual.
Caution
̪Specifications are subject to change without notice.
Check for correct signal-line
connections.
Check the input signal for correct
format ( 1-bit input )
Confirm the assignment of the
message or sound required.
TO OPERATE THIS PRODUCT SAFELY, PLEASE OBSERVE THE FOLLOWINGS
This symbol marks important instructions that, if ignored
or incorrectly followed, could conceivably lead to death or
serious injury.
This symbol marks important instructions that, if ignored
or incorrectly followed, could conceivably lead to injury
or property damage.
NOTES TO BE OBSERVED FOR SAFE OPERATION
Caution
Warning
Note to be followed to prevent any damage to the user and other personnel or
to assets are as follows
ع
The indications for warning are divided into the following classes according to
the degree of danger or damage incurred when the warning is not taken into
consideration and the product is not correctly used.
-1--8-
-7--6-
Vue de la page 0
1 2

Résumé du contenu

Page 1 - 㧚MAINTENANCE

٨Use only specified operating voltage range. Excess voltage hastens degradation.٨Make sure to set fuse in a power supply side, please connect a fuse.٨

Page 2 - 㧷㧶㧼㨂-㧟㧝㧜㧿-㧾㨅㧳

4048-L㧝PARTS NAMEHead coverSpare bulbReflectorBulbMotorName platePower supply wireLensSignal lineBodyVolume̪Lot number indicated2. REPLACEMENT PARTS3

Commentaires sur ces manuels

Pas de commentaire